User Guide

78 Communication
CD box*
In righthand drive model
쮿 Guide the CD box up against the fixing
holes on the vertical console.
쮿 The housing of the CD box must rest
against the vertical console.
쮿 Screw the housing to the lefthand fix
ing hole with the aid of a coin.
쮿 Fold the CD trays open and secure the
CD box through the hole in the rear wall
with the second screw.
쮿 Check that the housing is located se
curely and fit the cover cap over the
lefthand screw.
>Note!
Removal is done in the reverse order.
Installation in conjunction with the
ashtray, the drinks holder* or the
cassette box*
If so, note that the ashtray always must
remain installed in the uppermost posi
tion and the drinks holder always in
stalled in the lowest position. Always
install the items in the vertical console
from top to bottom.
The individual elements are linked to
gether by guides.
쮿 Push the top side of the element to be
installed as far as it will go along the
guide on the underside of the element
already installed above it.
쮿 Before screwing the individual ele
ments tight, check that they are prop
erly interconnected and are located
flush one above the other.