User Guide

Chapter 2 Using the stand
smarttech.com/kb/171370 13
To factory reset the stand
1. Connect the stand to a power outlet.
2.
Press the Down button and lower the stand to the lowest position.
3.
Press the Down button for five seconds and then release it.
The stand moves up and down 1 cm.
Raising and lowering the stand
To raise the stand
1.
Press and hold the Up button on the control panel.
2.
Release the Up button to stop raising the display.
To lower the stand
1.
Press and hold the Down button on the control panel.
2.
Release the Down button to stop lowering the display.