Product Data Sheet / Brochure

Specifications
SMARTBoard MX055-V2 interactive display with iQ – Model SBID-MX255-V2
smarttech.com/kb/171688 4
Connectors
Side connector panel
1 Accessory slot (for 60W OPS devices)
1 HDMI® 2.0 out with HDCP 2.2 support
5
1 USB 2.0 Type-A (for service use only)
1 USB 3.0 Type-A (for currently selected input source)
HDMI 1
1 HDMI 2.0 in with HDCP 1.4 and HDCP 2.2 support
1 USB 3.0 Type-B (for touch)
HDMI 2
1 HDMI 2.0 with HDCP 1.4 and HDCP 2.2 support
1 USB 3.0 Type-B (for touch)
Front connector panel
1 USB2.0 Type-A (for the display)
1 USB2.0 Type-A (for currently selected input source)
HDMI 3
1 HDMI 2.0 in with HDCP 1.4 and HDCP 2.2 support
1 USB 2.0 Type-B (for touch)
Bottom connector
panel
1 RS-232
2 RJ45
1 S/PDIF out (fixed)
1 Stereo 3.5 mm out (variable)
VGA 1
1 Stereo 3.5 mm in (for VGAin)
1 VGA in
1 USB 3.0 Type-B (for touch)
Installation requirements
Interactive display
See the SMARTBoard MX (V2) and MX (V2) Pro series interactive displays installation and
maintenance guide (
smarttech.com/kb/171555)
IMPORTANT
The display needs an internet connection for downloading and installing important updates.
Ask the network administrator to configure the network correctly for the iQ experience. For
more information about network configuration, see Connecting a SMART display with the iQ
experience to a network.
Room computers and guest laptops
General requirements See SMARTNotebook software release notes
4K UHD Video card that can support 3840 × 2160 resolution at 60 Hz
See Minimum requirements for Ultra High Definition or 4K on your interactive flat panel
5
HDCP is always enabled. Content is shown in 480p resolution if the external display doesn’t support HDCP.