User Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1 Welcome
- Chapter 2 Using basic features
- Chapter 3 Using the iQ apps
- Chapter 4 Connecting computers and other devices
- Chapter 5 Troubleshooting
- The display isn’t turning on
- The screen is blank or there’s a problem with the image on the screen
- There’s no sound or there’s a problem with the sound
- Touch isn’t working as expected
- The pens and erasers aren’t working as expected
- iQ apps aren’t working as expected
- SMART software on connected computers isn’t working as expected
- The SMART OPS PC module isn’t working as expected
- The Intel Compute Card isn’t working as expected
- Contacting your reseller for additional support
- Certification and compliance
Chapter 2 Using basic features
smarttech.com/kb/171554 17
SMARTBoard MX (V3, V2 and V2-C) series
The image and table below list the remote control’s functions.
No. Name Procedure
1
Power
l
Press to enter or exit Standby mode (see
Waking up the display
and putting it back to sleep
on page14).
Note
Touch is not available right after waking up the display or
turning it on. Wait a few seconds and then the display will
respond to touch.
l
Press and hold for four seconds to turn off the display.
2 Home Open the iQ Home screen (see
Using the Home button
on
page15).
3 Up and down
buttons
Select a menu option in the settings.
4 OK Select menu option in the settings.
5 Left and right
buttons
Change the value of the selected setting.