User Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1 Welcome
- Chapter 2 Using basic features
- Chapter 3 Using the iQ apps
- Chapter 4 Connecting computers and other devices
- Chapter 5 Troubleshooting
- The display isn’t turning on
- The screen is blank or there’s a problem with the image on the screen
- There’s no sound or there’s a problem with the sound
- Touch isn’t working as expected
- The pens and erasers aren’t working as expected
- iQ apps aren’t working as expected
- SMART software on connected computers isn’t working as expected
- The SMART OPS PC module isn’t working as expected
- The Intel Compute Card isn’t working as expected
- Contacting your reseller for additional support
- Certification and compliance
Chapter 2 Using basic features
smarttech.com/kb/171554 22
Changing a pen’s default color, thickness, and other properties
You can change a pen’s color, thickness, and other properties temporarily using the SMARTInk dynamic
(floating) toolbar when you’re viewing a connected computer’s input.
To change the pen’s default color, thickness, and other properties, see Changing
pen, eraser, and button
settings.
Erasing digital ink
You can erase digital ink from the screen using your palm or fist:
To erase digital ink
Move your fist or palm over the digital ink you want to erase.
Adjusting the volume
Use the buttons on the front control panel or the remote control to increase, decrease, or mute the
display’s volume.
Note
See
There’s no sound or there’s a problem with the sound
on page43 if you encounter issues with the
display’s sound.
To turn the volume up or down
Press the Volume Up
or Volume Down button on the front control panel or the remote control.
Notes
l
Press and hold the Volume Down button to rapidly decrease the volume.
l
When you press the Volume Up or Volume Down button on the front control panel or the
remote control, you can use the on-screen slider to adjust the volume.
To mute the volume
Press the remote control’s Mute
button.