User Manual
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1 Welcome
- Chapter 2 Using basic features
- Chapter 3 Using the iQ apps
- Chapter 4 Connecting computers and other devices
- Chapter 5 Troubleshooting
- The display isn’t turning on
- The screen is blank or there’s a problem with the image on the screen
- There’s no sound or there’s a problem with the sound
- Touch isn’t working as expected
- The pens and erasers aren’t working as expected
- iQ apps aren’t working as expected
- SMART software on connected computers isn’t working as expected
- The SMART OPS PC module isn’t working as expected
- The Intel Compute Card isn’t working as expected
- Contacting your reseller for additional support
- Certification and compliance
Chapter 1 Welcome
smarttech.com/kb/171554 9
You can connect to a network using Wi-Fi or the RJ45 LAN jack on the display:
l
Wi-Fi supports both 2.4 and 5 GHz bands.
l
The two RJ45 jacks allow you to connect the display and an external device, such as a computer, to
a Ethernet network.
Room computers and guest laptops
You can connect room computers and guest laptops and use the display to view and interact with them.
The display comes with SMART software that you can install on connected computers to take full
advantage of the display’s features while using the connected computers.
For more information, see
Chapter 4 Connecting computers and other devices
on page28.
Accessory slot
The iQ appliance is inserted in the accessory slot on the back of the following models:
l
SBID-MX365
l
SBID-MX375
l
SBID-MX386
l
SBID-MX265
l
SBID-MX275
l
SBID-MX286
Note
With the SBID-MX365, SBID-MX375, and SBID-MX386 models, you can insert an Intel Compute Card
in the appliance to provide a complete Windows 10 solution at your fingertips, without the need for an
external PC or cables.
For other models, you can install an OPS-compatible device, such as a SMART OPS PC module, in the
accessory slot. SMARTOPS PC modules provide a complete Windows
®
10 Pro installation.
For more information on SMART OPS PC modules, see
SMART OPS PC module
on page12.
Caution
The accessory slot’s maximum available power is 60 W. The slot is not a limited power source. To
reduce the risk of fire, make sure that accessories connecting to the slot satisfy the fire enclosure
requirements of IEC 62368-1.