User Guide
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1 Welcome
- Chapter 2 Connecting a computer
- Chapter 3 Orienting the interactive whiteboard
- Chapter 4 Using the interactive whiteboard
- Chapter 5 Maintaining the interactive whiteboard
- Chapter 6 Troubleshooting
- Tips for resolving issues with general behavior
- Resolving common issues
- No image is projected on the interactive screen, or a “No Input” message appears
- The projected image is blurry or not the same size as the interactive whitebo...
- The interactive screen doesn’t respond to touch
- Touch or ink alignment is inaccurate, the pointer moves erratically, or gaps ...
- The SMART software icon doesn’t appear in the notification area
- A small red × appears on the SMART software icon
- The orientation procedure doesn’t proceed to the second point
- Using the connection wizard
- Using SMART Diagnostics
- Contacting SMART Support
- Certification and compliance
Chapter 4 Using the interactive whiteboard
smarttech.com/kb/171660 21
Best practices for gestures and tools
Follow these guidelines when you use tools and gestures with your interactive product.
Hold pens at an angle greater than 45° from the interactive screen.
Hold your fingers perpendicular (90°) to the interactive screen at the contact point.
Keep your thumb, fingers, other hand, elbows, jewelry, loose clothing, and other
objects away from the interactive screen. They can generate unintentional
commands.
For “click” commands, quickly tap your finger on the interactive screen. Also, make sure you lift your
finger far enough away from the interactive screen between taps so your finger is not detected on or
close to the interactive screen.