User Guide
Table Of Contents
- Cover
- Important information
- Contents
- Chapter 1 Welcome
- Chapter 2 Connecting a computer
- Chapter 3 Orienting the interactive whiteboard
- Chapter 4 Using the interactive whiteboard
- Chapter 5 Maintaining the interactive whiteboard
- Chapter 6 Troubleshooting
- Tips for resolving issues with general behavior
- Resolving common issues
- No image is projected on the interactive screen, or a “No Input” message appears
- The projected image is blurry or not the same size as the interactive whitebo...
- The interactive screen doesn’t respond to touch
- Touch or ink alignment is inaccurate, the pointer moves erratically, or gaps ...
- The SMART software icon doesn’t appear in the notification area
- A small red × appears on the SMART software icon
- The orientation procedure doesn’t proceed to the second point
- Using the connection wizard
- Using SMART Diagnostics
- Contacting SMART Support
- Certification and compliance
smarttech.com/kb/171660 23
Chapter 5 Maintaining the
interactivewhiteboard
Tips for trouble-free performance 23
Cleaning your interactive whiteboard 23
Transporting your interactive whiteboard 24
Tips for trouble-free performance
SMARTBoard M700 and M700V series interactive whiteboards are durable, but take care to prevent
damage to them and their parts:
l
Replace the pen when the nib wears out.
l
Don’t touch the interactive screen with sharp or pointed objects.
l
Don’t use adhesive tape on the interactive screen.
l
Don’t set up and use your interactive whiteboard in an area with excessive levels of dust, humidity,
or smoke.
l
Don’t use low-odor dry-erase markers because they can be very difficult to erase. Use standard
(high-odor) dry-erase markers that show a warning to use them only in well-ventilated areas.
l
Don’t attach objects (decorations, magnets, stickers, and so on) to your interactive whiteboard’s
screen.
l
Keep the optical touch system clean and clear of obstruction.
l
Keep the interactive whiteboard’s USB connection as short as possible (avoid extenders if you can).
Cleaning your interactive whiteboard
With proper care, a SMARTBoard M700 or M700V series interactive whiteboard will provide years of
trouble-free service. Follow these tips to keep your interactive whiteboard clean.
l
To clean dust, dirt, and fingerprints, wipe the writing surface with a damp cloth or sponge. Use mild
soap, if required. You can also use isotropy alcohol (IPA) wipes to clean the whiteboard’s screen.
l
Don’t spray cleaner directly onto the interactive screen. Instead, spray a light amount of cleaner on
a cloth and then gently wipe the interactive screen.