Owner's manual

X
Press RES/+ button ; briefly.
The cruise control resumes the previ-
ously set speed.
i
The last set speed stored in memory is
deleted when the engine is turned off.
Changing the set speed
You must have set a speed prior to increas-
ing or decreasing the current speed.
i
Depressing the accelerator pedal does
not deactivate the cruise control. After
a brief acceleration (e.g. for passing),
the cruise control will resume the last
set speed.
Continuous adjustment
X
Press and hold RES/+ button ; to
increase the speed.
or
X
Press and hold SET/− = to decrease the
speed.
X
Press and hold the respective button
until the desired speed is reached.
X
Release the respective button.
The new speed is stored.
Adjustment in 1 mph (Canada 1 km/h) incre-
ments
X
Press RES/+ button ; briefly to increase
the speed.
or
X
Press SET/− = briefly to decrease the
speed.
The new speed is stored after releasing the
respective button.
HVAC (Heating, Ventilation, Air Con-
ditioning)
Notes on HVAC
G
WARNING
Follow the recommended settings for heat-
ing and cooling given on the following
pages. Otherwise the windows could fog up,
impairing visibility and endangering you
and others.
Air conditioning with climate control*
The air conditioning improves the level of
comfort when driving at high outside tem-
peratures by cooling and dehumidifying
the air.
Nearly all dust particles, pollutants, are
filtered out by an integrated particle fil-
ter before outside air enters the passenger
compartment through the air distribution
system. It also operates when the air con-
ditioning is switched off and you have
switched on the blower.
The air conditioning only works when the
engine is running and the blower is
switched on. Maximum effectiveness is
achieved if you drive with the windows
closed.
i
In warmer weather, ventilate the
passenger compartment for a short
period of time before utilizing the air
conditioning.
102
HVAC (Heating, Ventilation, Air Conditioning)
>> Controls.
* optional