Owner's manual

Left bulb carrier with bulb sockets (right bulb
carrier in reverse)
:
Retaining tab
=
Brake, tail, turn signal and side marker
lamp bulb
?
Backup lamp bulb
X
Depending on which bulb needs to be
replaced, press gently onto bulb =
or ? and turn it counterclockwise.
X
Pull the bulb out of the bulb socket.
X
Installing: Insert the new bulb into the
bulb socket.
X
Press gently onto the bulb and turn it
clockwise until it engages.
X
Insert the bulb carrier into the tail lamp
housing.
X
Press gently onto the bulb carrier.
Let retaining tab : engage.
X
Fold the damping material backward, if
necessary.
X
Reinstall the side cover in the cargo
compartment.
High-mounted brake lamp
X
Removing: Unscrew retaining screws :.
X
Remove high-mounted brake lamp ?.
X
Detach electrical connector ; from bulb
socket =.
X
Turn the bulb counterclockwise and pull
it out of its socket.
X
Installing: Install in the reverse order.
License plate lamps
G
WARNING
High outside temperature, stop-and-go
traffic, driving on long uphill grades, or
driving at high engine speed may increase
the temperature in the engine compart-
ment. Therefore the area around the air
slots in the rear apron may be hot. Let the
engine cool off before touching this area
to prevent burns.
Replacing bulbs
183
>> Practical hints.
Z