User Manual

－8－
Traceability control system PC software
5．PC software and preparation
5-1) Starting the software
Please start <SWrench.NET>.
If you are using a < torque wrench > only the following, it will start directly < setting operation
screen >.
If you are using a < option function > at the same time the following, it will be displayed <Switch
button>.
5-2) Preparation of communication
This section describes the procedures for performing communication between the torque
wrenches. Start the < setting operation >.
Menu bar
1) Communication settings
[Menu bar・Setting Communication settings] [Communication settings]Icon
(1) Select the COM number from the pull-down.
(2) Please click on the <OK> button.
(3) There is a clear confirmation request of setting data.
Please click on the " Yes (Y) ".
☞
Point
If the [COM number] does not appear in the pull-down menu, please check
the Windows Device Manager.
Switch Button