User Manual

－9－
Traceability control system PC software
2) Wireline・Wireless communication
[Menu bar・communication Wireline/Wireless]
[Wireline / Wireless]Icon
(1) Wired connection completion ・・・・・
(2) Wireless connection completion ・・・・・
Wireless ID setting ・・・・・
*If the communication between the torque wrenches of the appropriate is successful icon is
enabled.
5-3) Menu bar and tool bar icon
Top：Explanation of menu bar
Bottom：Explanation of tool bar icon
Detailed function
File－Open
Open icon
Opens torque wrench setting and output data files.
(Extension: .setting / .dat / .rnd)
File－Save
Save icon
Saves torque wrench setting and output data files.
(Extension: .setting / .dat / .rnd)
File－Transfer to Excel
Transfer to Excel icon
Transfers torque data that is output on<Data output operation> to an
Excel file.(Extension: .xls / .csv)
File－Exit
Ends the program.
Setting－Communication setting
Communication property icon
Sets the PC connection port.
Setting－Option
Option icon
Sets the parameters on <Data output operation>.
Setting－System time reading
System time icon
Reads the time and date information set on the PC.
Display－Setting operation
Setting operation icon
Displays <Setting operation> screen.
Display－Maintenance operation
Maintenance operation icon
Displays <Maintenance operation> screen.
☞
Point
If the torque wrench cannot be recognized by wireless communication, the
power of the torque wrench is not turned on or the wireless channel is
different. Please check it again.
いるか