User Manual

－11－
Traceability control system PC software
6．PC software Setting operation
6-1) setting operation
1) Overall
2) ＜Torque wrench data＞
(1)[Wrench type]
Wrench type shows HTW-nn.
(2) [Wrench name]
The wrench name is set on <Maintenance operation> screen (up to 8 alphanumeric
characters).
(3) [Unit code]
The unique unit code can be set for each set of conditions (up to 8 alphanumeric
characters).
(4) [Torque range]
Mode setting
Pattern setting
Torque wrench data