User Manual

－12－
Traceability control system PC software
The field shows the tightening range that can be set on the torque wrench.
(5) [Total number]
The field shows the number of torque data sets stored in the memory of the torque
wrench.
(6) [Date]
The date and time information which the torque wrench has recorded will be displayed.
[Update]
System time icon to display the time and date information on the PC.
Date and time information by writing to the torque wrench will be updated.
(7) [Battery level indicator] ※The right side of the Menu bar
The battery remaining amount of the torque wrench is displayed.
3) ＜Pattern setting＞
Up to 10 operation patterns (PT01 to PT10) can be set on the torque wrench.
Select a cell of a pattern and the following window will appear.
(1) [Lower torque]
Sets an arbitrary value of the lower limit torque.
(2) [Upper torque]
Sets an arbitrary value of the upper limit torque.
(3) [Control number]
☞
Point
* Enter a positive number for a clockwise (CW) direction and a negative
number for a counterclockwise (CCW) direction.