User Manual

－ 6 －
Traceability control system PC software
4．Communication and connection settings
4-1) Connect the torque wrench(receiver) to the PC with the USB cable
Display
Procedure
Please connect the torque wrench or wireless
receiver.
It is recognized automatically.
Confirmation of the COM number
USB Serial Port (COM**) will be created in Ports
(COM&LPT).
<Changing COM No.>
Right-click the COM No. and click Properties.
Properties window will open.
Click Advanced… on Properties window.
Advanced Settings for COM** window will open.
☞
HTW: Grip end
DPW: Inside the cap on the Back
Point
When COM No. is between 1 and 16, the installation has been complete.
If it is larger than 16, change the number to one between 1 and 16 in the following
procedure.