Owners manual

www.smartavi.com

For the initial setup, click the Network Setting button and

manually assign an IP address to the SMTCP-2. This will assure

that the SMTCP-2 will always

have the same IP address. Be

sure to choose an address that

will not conict with any other

devices on the network, and

that the address is not in the

range of the DHCP server.

1. Matrix

2. Frame Address

3. Device Cong

4. Network Setting

5. User Administration

COMPUTER

IP ROUTER

SMTCP-2

RS-232

SERIAL

CAT5

MATRIX SWITCH

8. Open a web browser and navigate to the IP address

that is indicated. You will be prompted to enter a

username and password.

9. The default login (case sensitive) is as follows:

User ID: Admin

Password: Pass

10. Once connected to the SMTCP-2, you will see the following menu of options:

11. Once you have manually assigned an IP address to the

SMTCP-2, you may disconnect the Straight-Through RS-232

(Serial) cable from the computer

12. Connect the SMTCP-2 to the matrix switch with a Cross

RS-232 (Serial) cable.

It is also recommended that you set a password for the SMTCP-2 at this point. To set the

password (and/or username), click on the User Administration button, enter the password

and click Submit. This sets the password for the HTTP interface only.

Controlling the CATSwitch with the SMTCP module (continued)