Owners manual

5
HARDWARE INSTALLATION
1. Power off the computers and displays.
2. Connect the HDMI video cables from the video sources to the HDMI inputs on the rear of the MXCORE
32X32.
3. Connect the displays to the HDMI outputs on the rear of the MXCORE 32X32.
4. Optionally connect the IR Eye for IR remote control.
5. Optionally connect a computer to the RS-232 port on the MXCORE 32X32 or a NET-IP-PRO for addi-
tional remote control.
6. Power on the Video sources and displays.
7. Power on the MXCORE 32X32.
Figure5‐1
Figure5‐2