User's Manual

The Monitor utility screen shows the current parameters of operation.
The Status tab displays the following information.
Operating Mode - It indicates whether the airNIC is in Infrastructure mode
(connected to Access Point) or Ad-Hoc mode (peer to peer connection).
Channel - This is automatically selected when the airNIC is connected/associated
to an Access Point in Infrastructure mode. In Ad-Hoc mode, the Channel can be
selected manually. However, you should select the same Channel that is being
used by other client Adapters for peer to peer connection.
SSID - SSID or Service Set Identifier displays the name of the Access Point to
which the airNIC is connected in Infrastructure mode. In Ad-Hoc mode, SSID
indicates the name of the airNIC and can be manually assigned by a user. All client
Adapters should have the same SSID in Ad-Hoc mode.
Tx Rate – This can be set to 1, 2, 5.5, 11Mbps or Auto rate. If a specific rate (1, 2,
5.5 or 11 Mbps) is selected, the airNIC will try to connect only at that rate, even if a