User's Manual

12
u n w i r i n g o u r w o r l d ™
Antenna Connections
The TOTAL series of products provides the exibility of using an external antenna through
the N-Connector.
Note:
This is not applicable for the airClient Nexus TOTAL (sB3413 and sB3414)
which do not have an external antenna connector.
To connect the external antenna:
1. Connect the antenna RF cable to the correct N-Connector (please see
Figure 3-4a/b/c/e).
After completing all the connections, the radio system should look similar to the following
gure.
Figure 3-6 Typical TOTAL radio system
Powering and Resetting the Unit
After performing the installations and connections as shown in Figure 3-6, you may boot up
Chapter 3 - Installation