User's Manual

airPoint XO Series Page 8 of 24
• Verify that the PWR , ETH and RF LEDs are ON .
• airPoint XO™ with its Factory Default Settings will serve the nearby
wireless clients
4. Installing the airPoint XO™ Series
Grounding :
• Crimp an AWG # 10 grounding wire to the Tag provided.
• Place this Tag on the grounding Stud at the bottom side of
the aP XO™ .
• Fasten it with the M6 nut tightly to the grounding Stud .
• Connect the other end of the earth wire to the Power Ground
on the premises .
Note : Grounding has to be done before mounting the aPXO™ on
the wall or pole .