Installation Guide

Page 8
TROUBLESHOOTING
SmartBurner
™
is a carefully engineered product. Many times what may appear
to be a product issue, under certain conditions, is a normal operating
characteristic of the stove or product.
TROUBLE
PROBABLE CAUSE
REMEDY
Entire range does
not operate
Blown fuse/tripped
circuit breaker.
Replace fuse/reset circuit
breaker.
Cord/plug not
attached to wall outlet.
Make sure cord/plug is
plugged tightly into outlet.
Power Outage.
Check house lights to be sure.
SmartBurner
™
plates do not heat
Control knob set too
low.
Turn knob slightly higher until it
starts heating.
Incorrect element knob
is turned on.
Ensure the correct element
knob is turned on.
SmartBurner
™
is not
properly plugged into
the socket.
SmartBurner
™
terminals
or socket may be
damaged or corroded.
Re-plug the plate into the
socket. Clean or replace
defective components. Ensure
knob is set to OFF and the
SmartBurner
™
plates are
completely cool.
Cooking utensils have
uneven bottom.
Replace cooking utensil with
good quality, flat-bottomed
pot or pan.
SmartBurner
™
plate too hot,
glows red
Temperature is not
being controlled.
Contact Pioneering
Technology for service.
SmartBurner
™
plate
not hot
SmartBurner
™
not
functioning properly.
Contact Pioneering
Technology for service.