Owner Manual


 Press SET button once to set the temperature of the refrigerator. Press "+" and "-" keys to
adjust the setting temperature from 0~50°F.
 Press SET again to switch temperature unit. Use the "+" and "-" keys to adjust the display
Celsius and Fahrenheit.
 Press the SET button again to enter the ABS voltage state. Use the "+" and "-" buttons to
adjust the ABS to Hl, NED or LO.
 The display will flash for 5-6 seconds after setting, indicating the value is set, and then
shows the temperature of the refrigerator. (The "+" and "-" button won't work if you don't
press SET first. 
 

 Long press on the refrigerator during operation
 When the refrigerator is running, press and hold the shutdown button for 3 seconds to
shut down
 Pull out the cigarette butt socket
r
上
C 3


＠ ＠
wARNING!
Please place the refrigerator in a well ventilated location and make sure the vents are not blocked.
ANOTE!
Battery voltage is too low!
When the battery voltage is too low, the battery protector works, the refrigerator power indicator
flashes orange, and the display does not display. Please charge the battery at this time.
Defrost
It is possible that frost or ice builds up on the inner wall of the refrigerator, which will affect the
performance and efficiency of the cooling system and must be removed regularly.

 Remove the storage from the refrigerator
 If necessary, store the items to anot her refrigerator
 Turn off the refrigerator and open the refrigerator door, keep it open until the frost melts in
the refrigerator and remove the frost

 Remove the cigarette lighter plug cover
 Remove t
he screws on the upper half of the case with a screwdriver
 Carefully separate the upper and lower halves
