User Guide

Molding Proles
Product
Item #
Description
T-Mold
Stock/SOE
Item #
T-Mold
Model #
Reducer
Stock/SOE
Item #
Reducer
Model #
Stair Cap
Stock/SOE
Item #
Stair Cap
Model #
Threshold
SOS Item #
Threshold
Model #
Qtr Rd
SOS Item #
Qtr Rd
Model #
534153 Rustic Hickory 774410 TM50SLV501B 774409 R50SLV501B 774408 SC50SLV501B 787922 TH50SLV501B 787912 QR50SLV501B
534154 Stillwater Oak 774413 TM50SLV502B 774412 R50SLV502B 774411 SC50SLV502B 787923 TH50SLV502B 787913 QR50SLV502B
534155 Canberra Acacia 774416 TM50SLV503B 774415 R50SLV503B 774414 SC50SLV503B 787924 TH50SLV503B 787914 QR50SLV503B
538133 Cottage Oak 874714 TM50SLV505B 874716 R50SLV505B 874715 SC50SLV505B 787926 TH50SLV505B 787916 QR50SLV505B
712184 Tahitian Walnut 1053461 TM50SLV506B 1053463 R50SLV506B 1053462 SC50SLV506B 787927 TH50SLV506B 787917 QR50SLV506B
1035197 Tawny Oak 1053464 TM50SLV508 1053466 R50SLV508 1053465 SC50SLV508 855993 TH50SLV508 856017 QR50SLV508
1035198 Brazilian Ipe 1053467 TM50SLV509 1053469 R50SLV509 1053468 SC50SLV509 855994 TH50SLV509 856018 QR50SLV509
08.09.18
Used to create nishing touch
between oor and baseboards.
Measure and cut to t. Afx
molding using glue, molding tape
or nails. When using adhesive,
be sure to follow manufacturer’s
instructions completely.
QUARTER ROUND
.71"
.71"
This t-shaped transition piece
covers the narrow gap in a
doorway between two adjacent
oors that are on the same level.
Cut T-molding and Track to same
desired length. Secure Track to
oor with glue, molding tape or
nails and press or tap T-molding
into Track to desired depth using
rubber mallet.
T-MOLDING
.51"
1.26"
This is used to transition from a
higher-prole (or thickness) oor
to a lower-prole oor.
Cut Reducer and Track to same
desired length. Secure Track to
oor with glue, molding tape or
nails and press or tap Reducer
into Track to desired depth using
rubber mallet.
REDUCER
.51"
1.42"
Used when installing Smartcore
®
on stairs, providing the nishing
touch to the front stair edge.
Measure and cut to t. Afx
molding using adhesive, being sure
to follow adhesive manufacturer’s
instructions completely.
STAIR CAP
1.16"
Apply adhesive here
2.07"
Used to transition from hard surface
oors to oors of a different height
level or thickness.
Measure and cut to t. Afx molding
using adhesive, being sure to
follow adhesive manufacturer’s
instructions completely.
BABY THRESHOLD
.39"
.30"
1.38"
.31"
Apply adhesive here
Each piece of coordinating Smartcore
®
molding is 94”
long and composed of a waterproof core wrapped in
vinyl. The molding can be cut to desired length using a
ne-toothed nishing saw blade.
When installing, we recommend using Loctite PL 3X Premium
Construction Adhesive (or equivalent). Scuff the underside of
the part to receive adhesive with sandpaper and apply in “S”
pattern. Use weight to apply pressure until fully cured (usually
48 hours). An alternative method is to use double-sided molding tape
such as Hilway Direct Molding Tape. If you choose to use nails (not
recommended), carefully pre-drill pilot holes for the nails.
Smartcore Customer Service: 1-800-355-7429