User Guide

Each piece of coordinating Smartcore
®
Naturals
molding is 94” long and composed of a waterproof core
wrapped in vinyl. The molding can be cut to desired
length using a ne-toothed nishing saw blade.
When installing, we recommend using Loctite PL 3X Premium
Construction Adhesive (or equivalent). Scuff the underside of
the part to receive adhesive with sandpaper and apply in “S”
pattern. Use weight to apply pressure until fully cured (usually
Used to create nishing touch
between oor and baseboards.
Measure and cut to t. Afx
molding using glue, molding tape
or nails. When using adhesive,
be sure to follow manufacturer’s
instructions completely.
QUARTER ROUND
.70"
.70"
This t-shaped transition piece
covers the narrow gap in a
doorway between two adjacent
oors that are on the same level.
Cut T-molding and Track to same
desired length. Secure Track to
oor with glue or molding tape, and
press or tap T-molding into Track to
desired depth using rubber mallet.
T-MOLDING
.33"
1.71"
.33"
1.77"
This is used to transition from a
higher-prole (or thickness) oor
to a lower-prole oor.
Cut Reducer and Track to same
desired length. Secure Track to
oor with glue or molding tape, and
press or tap Reducer into Track to
desired depth using rubber mallet.
MULTI REDUCER
Used when installing Smartcore
®
Naturals on stairs, providing the
nishing touch to the front stair edge.
Cut Stair Cap and Track to same
desired length. Secure Track to oor
with glue or molding tape, and press
or tap Stair Cap into Track to desired
depth using rubber mallet.
STAIR CAP
1.57"
2.16"
Apply adhesive here
Apply adhesive here
Molding Proles
Used to transition from hard surface
oors to oors of a different height
level or thickness.
Cut Threshold and Track to same
desired length. Secure Track to
oor with glue or molding tape, and
press or tap Threshold into Track to
desired depth using rubber mallet.
BABY THRESHOLD
.35"
1.73"
.41"
Product
Item #
Description
T-Mold
SOS Item #
T-Mold
Model #
Reducer
SOS Item #
Reducer
Model #
Staircap
SOS Item #
Staircap
Model #
Threshold
SOS Item #
Threshold
Model #
Qtr round
SOS Item #
Qtr round
Model #
1051334 Rivers Edge Oak 1074100 03Z8805003 1074102 03W8905003 1074103 03Z8705003 1074101 03Z9005003 1074099 03W8605003
1051335 Cliffside Oak 1074105 03Z8807010 1074107 03W8907010 1074108 03Z8707010 1074106 03Z9007010 1074104 03W8607010
1051336 Cold Mountain Oak 1074110 03Z8807015 1074112 03W8907015 1074113 03Z8707015 1074111 03Z9007015 1074109 03W8607015
1051337 Timber Creek Oak 1074115 03Z8804001 1074117 03W8904001 1074118 03Z8704001 1074116 03Z9004001 1074114 03W8604001
1051338 Stepping Stone Oak 1074120 03Z8805004 1074122 03W8905004 1074123 03Z8705004 1074121 03Z9005004 1074119 03W8605004
1051340 Boulder Creek Hickory 1074125 03Z8803002 1074127 03W8903002 1074128 03Z8703002 1074126 03Z9003002 1074124 03W8603002
1051341 Hawks Crest Hickory 1074130 03Z8805005 1074132 03W8905005 1074133 03Z8705005 1074131 03Z9005005 1074129 03W8605005
1051342 Hot Springs Hickory 1074135 03Z8804008 1074137 03W8904008 1074138 03Z8704008 1074136 03Z9004008 1074134 03W8604008
1051343 Spring Creek Bamboo 1074140 03Z8805011 1074142 03W8905011 1074143 03Z8705011 1074141 03Z9005011 1074139 03W8605011
1051344 Stepp Falls Bamboo 1074145 03Z8803006 1074147 03W8903006 1074148 03Z8703006 1074146 03Z9003006 1074144 03W8603006
1051339 Bluegrass Trail Maple 1074150 03Z8805009 1074152 03W8905009 1074153 03Z8705009 1074151 03Z9005009 1074149 03W8605009
48 hours). An alternative method is to use double-sided molding tape
such as Hilway Direct Molding Tape. If you choose to use nails (not
recommended), carefully pre-drill pilot holes for the nails.
Apply adhesive hereApply adhesive here
08.09.18Smartcore Customer Service: 1-800-355-7429