Specifications

The connection distance < = 100m (open and unobstructed range)
Bluetooth Specifications
Bluetooth protocol supported V4.2
The connection distance <=30m (open and unobstructed range)
Environment Parameters
Operating temperature range
0℃ ～ +40℃
Storage temperature range
-20℃ ～ +55℃
Operating humidity range
45% ～ 80%RH
Storage humidity range
30% ～ 90%RH
Installing Your Device
a. Carefully plug the micro USB connector into the micro USB interface of the device.
b. Plug the USB connector of the power cable into the USB port of power adapter.
(The power adapter is required for the unit should be output DC 5V/1A).
c. Hold the “Power ON” button for 3s to power on the Wi-Fi Gateway.
Instructions for SmartCuckoo App
1. Installing the SmartCuckoo App
• Your Smart phone operating system must meet the following minimum requirements:
iOS: iOS 8.0 or above / Android: Android 6.0 or above.
• Download and install the SmartCuckoo App from the Apple Store/Google Play Store.
2. Connecting with the SmartCuckoo App
Make sure your 2.4GHz Wi-Fi network is working properly before connecting the Wi-Fi
Gateway to the network.
a. Launch the SmartCuckoo App.
b. Click the button “Add Wi-Fi Device”, and then follow the instructions on the App
pages to complete the steps.
c. The Wi-Fi Gateway device will be shown on the main page after it is added. (Please
check the above steps and try again if adding fails.)

3. Using the SmartCuckoo App
After the Wi-Fi Gateway is added, the App can obtain the data of the Bluetooth devices
which are scanned by the Wi-Fi Gateway over network. (For more functions, please see
App pages.)

LED Indicator Status Guides
Working Status Indicator Descriptions
Power on The blue light is on
Searching and Connecting Wi-Fi The blue light flashes at intervals of 1s on and 2s off
Wi-Fi Connected The blue light is steadily on
Wi-Fi Connection Error The orange and blue lights flash alternately