Specifications

Specifications
Produce Size 6.32*1.8*1.68cm
Weight 25g
Accuracy
Temperature: ±0.3℃,
Humidity: ±2%RH（25℃，60%RH）
Light Intensity: ±100 LUX
Battery 1*AAA alkaline 1.5V
Bluetooth-enable Distance <=30m (open and unobstructed range)
Operating Temperature Range
Thermometer: -20℃~60℃
Hygrometer: 0℃~50℃
Storage Temperature Range
-20℃~55℃
Operating Humidity Range 0--95%RH
Storage Humidity Range 30%--90%RH


Installing Your Device
• Pull out the battery insulation sheet from the Bluetooth Thermo-Hygrometer.
• Place the device where you want or hang it with the lanyard.
Instructions for SmartCuckoo App
1. Installing the SmartCuckoo App
• Your Smart phone operating system must meet the following minimum requirements:
iOS: iOS 8.0 or above / Android: Android 6.0 or above.
• Download and install the SmartCuckoo App from the Apple Store/Google Play Store.
2. Pairing with the SmartCuckoo App
a. Turn on Bluetooth in your phone and get close to the thermo-hygrometer.
(Location Services/GPS should be turned on for Android users).
b. Launch the SmartCuckoo App.
c. Click the button “Add Bluetooth Device”, and then follow the instructions on the App
pages to complete the steps.
d. The device will be shown on the main page after it is paired. (Please check the above
steps and try again if pairing fails.)
3. Using the SmartCuckoo App
After the Bluetooth Thermo-Hygrometer is paired, the data, which detected by the device,
like as thermometer, hygrometer and light intensity will be shown on App page. (For more
functions, please see App pages.)


Troubleshooting
• The App cannot pair the Bluetooth Thermo-Hygrometer.