Full Product Manual

vi
©2013 Smarter Tools, Inc. All Rights Reserved
Controls and Features (cont’d)
_________________________________________________________________________________________________
Control Panel
1. Engine Switch – Used to turn on and off the
engine. For electric models it is also used to
start the engine.
2. Hour Meter – Measures the number or hours
the engine has run and displays the
voltage(120)/Hz produced by generator.
3. Circuit Breakers – Protects the generator
against electrical overload.
4. (2) 120V 20A Duplexes – These duplexes are
protected by a (2) 20A circuit breakers. Use
each duplex to operate 120 volt AC, single
phase, 60 Hz loads requiring up to 20 A or 2400
Watts of power.
5. 120/240V 30A Twist-Lock (L14-30R) –
Protected by a 30A circuit breaker. This
receptacle powers 240 Volt AC, 60 Hz, single
phase loads requiring up to 30A or 7200 Watts
of power. If an L14-30P plug is wired for only
one 120 Volt leg (3-wire connection) then this
receptacle powers 120 Volt AC, 60 Hz, single
phase loads requiring up to 30A or 3600 Watts
of power.
6. 120V 30A Twist-Lock (L5-30R) – This outlet is
protected by a 30A circuit breaker. Use this
Twist-Lock to operate 120 volt AC, single phase,
60 Hz loads requiring up to 30A or 3600 Watts
of power.
7. 12V DC Connectors – Use to charge 12V
batteries.
8. General Specifications
9. Ground Terminal – Consult an electrician for
local grounding regulations.