Use and Care Manual

Unpacking
After unpacking the product, inspect carefully for any damage that may have
occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit
into service.
WARNING!
DO NOT OPERATE TOOL IF DAMAGED DURING SHIPPING,
HANDLING OR USE. DAMAGE COULD RESULT IN
BURSTING AND CAUSE INJURY OR PROPERTY DAMAGE.
!
General safety Information
1. Read all manuals included with this product carefully. Be thoroughly
familiar with the controls and the proper use of the equipment.
2. Follow all local electrical and safety codes as well as the United
States National Electrical Codes (NEC) and Occupational Safety and
Health Act (OSHA).
WARNING!
USE A FACE MASK/RESPIRATOR AND PROTECTIVE
CLOTHING WHEN SPRAYING. ALWAYS SPRAY IN A WELL
VENTILATED AREA TO PREVENT HEALTH AND FIRE
HAZARDS. REFER TO MATERIAL SAFETY DATA SHEETS
(MSDS) OF SPRAY MATERIAL FOR DETAILS.
WARNING!
NEVER SPRAY CLOSER THAN 25 FEET TO THE
COMPRESSOR! IF POSSIBLE, LOCATE COMPRESSOR IN
SEPARATE ROOM. NEVER SPRAY INTO THE COMPRESSOR,
COMPRESSOR CONTROLS OR THE MOTOR.
3. Do not smoke or eat when spraying paint, insecticides, or other
flammable substances.
WARNING!
DO NOT SPRAY FLAMMABLE MATERIALS IN VICINITY OF
OPEN FLAME OR NEAR IGNITION SOURCES. MOTORS,
ELECTRICAL EQUIPMENT AND CONTROLS CAN CAUSE
ELECTRICAL ARCS THAT WILL IGNITE A FLAMMABLE GAS
OR VAPOR. NEVER STORE FLAMMABLE LIQUIDS OR GASES
IN THE VICINITY OF THE COMPRESSOR.
!