Use and Care Manual

Operating Instructions
Please read and save these instructions. Read carefully before attempting to
assemble, install, operate or maintain the product described. Protect yourself and
others by observing all safety information. Failure to comply with instructions
could result in personal injury and/or property damage! Retain instructions for
future reference.
Description
The 800S Digital HVLP Spray Gun offers superior material flow, atomization and
transfer efficiency. It incorporates a Digital Air Micrometer so there is no need for
an external gauge. The LED display is located at the top of the gun and not on
the handle to maximize its visibility while in use. The 800S is for coating larger
surfaces, thick layers and spotted effects. Widely used for primer. Will apply thick
primer quickly. Best suited for thicker materials such as flakes, heavy solid
materials, primer, primer sealers, polyester primers, varnish, polyurethane, oil
base paints, enamels, epoxy, plastic adhesives, floor paving paints, latex (on
walls), splatter paints, multi-fleck, etc. HVLP (High Volume Low Pressure)
technology provides a higher transfer of materials while reducing bounce-back
and overspray. Ideal for spraying heavier materials superior performance for
deck, fence, furniture and automotive work. External mix for fine atomization with
adjustable air, fluid, and spray pattern controls. Digital Air Micrometer no need for
an external gauge. Stainless Steel fluid passages and needle. Fully adjustable
spray pattern for spraying large surfaces and tight areas. Fluid Nozzle: 1.4mm
(1.2-1.8mm). Pattern width: 180-260mm. Required CFM: 8CFM. Working
pressure at nozzle: 7-8PSI. 1000cc/33oz Aluminum cup. Stainless steel fluid
passages and needle. Fluid inlet size: 3/8 in. Air Inlet Size: ¼ in. Air Micrometer
with digital LED.