User Manual

AIN16-M01 Analog Integrated Module User Manual
AIN16-M01 Analog Integrated Module 2017-03-17 Version 1.1 Page 8 of 13
5 PROTECTION
All data can be protected via HMC9000 controller. HMC9000 can connect to two AIN16-M01 modules at
the same time and users can select module address via dial switch. Following parameters can be set via
HMC9000:
1) AIN16-M01 module enable: HMC9000 can communicate with the module and collect the data;
2) Each of sensor’s alarm threshold and alarm are enabled;
AIN16-M01 can collect data only and all alarms are initiated by HMC9000 controller. HMC9000 will
initiate alarm when the sensor value is abnormal. There are two kinds of alarm: warning alarm and
shutdown alarm. All alarms are handled by HMC9000 controller only.
5.1 WARNING
Warning types are as follows:
No.
Items
Range
Description
1
PTIN1~ PTIN8
High
From “Waiting for load”
delay to “Cooling” delay
When the controller detects the sensor warning
signals, it will initiate a warning alarm and the
corresponding alarm information will be displayed
on HMC9000 LCD.
2
MP1~MP3 High
Always active.
3
CIN1 High
From “Waiting for load”
delay to “Cooling” delay
4
PTIN1~ PTIN8
Low
From “Waiting for load”
delay to “Cooling” delay
5
CIN1 Low
From “Waiting for load”
delay to “Cooling” delay
6
PTIN1~ PTIN8
Open Circuit
Always active.
7
CIN1 Open
Circuit
Always active.