User's Manual

Page 12 of 60 2334-2xx- Rev: 12/13/2012 1:54
PM
16. Connect Neutral to the Final Keypad’s white wire.
17. Connect Ground to the Final Keypad’s bare copper wire.
18. For each “middle” junction box (all remaining/4-wire switches):
 Connect the 2 black Travelers to the middle Keypad’s black wire.
 Cap the 2 other Traveler wires.
 Cap the middle Keypad’s red wire.
 Connect Neutral wire to middle Keypad’s white wire.
 Connect Ground wire to middle Keypad’s bare copper wire.
19. With button labels right-side up, gently place Keypads into junction boxes and screw in place.
20. Turn breaker(s) on.
All Keypads’ LEDs will illuminate.
21. Verify Keypads are working properly by turning the light on and off from all Keypads.
22. Reinstall the trim plates.
Local Control
LEDs
Button LED Meaning
ON On All on
OFF On All off
MAIN On/Off On All on