User's Manual

INSTEON-compatible RemoteLinc User’s Guide
Page 8 of 18
Turning the Audio Beeper On and Off
This procedure toggles the sound OFF or ON. The factory default is ON.
1. Simultaneously press and hold the DIM and BRIGHT Buttons for 10 seconds. RemoteLinc will beep
once and its Status LED will begin blinking slowly.
2. Release the DIM and BRIGHT Buttons.
3. Press and release the BRIGHT Button. RemoteLinc will beep twice and its Status LED will illuminate
steadily. The audio beep is now disabled.
4. Repeat steps 1 through 3 to re-enable the audio beep function.
Turning the Status LED On and Off
This procedure toggles the white Status LED OFF or ON. The factory default is ON.
1. Simultaneously press and hold the DIM and BRIGHT Buttons for 10 seconds. RemoteLinc will beep
once and its Status LED will begin blinking slowly.
2. Release the DIM and BRIGHT Buttons.
3. Press and release the ALL OFF Button. RemoteLinc will beep twice and its Status LED will now be
disabled.
4. Repeat steps 1 through 3 to re-enable the Status LED.
Stuck Button Feature
If any button on RemoteLinc is depressed for longer than 60 seconds, the controller will enter sleep mode
until the button is released. This feature is provided to preserve battery life in situations like RemoteLinc
falling between sofa cushions.