Owner's Manual

Page 4 of 22 Rev: 9/30/2011 1:26 PM

Thermostat Button Overview

1 Up/Down adjust the temperature setpoint based on the mode you are currently in

2 Mode allows the user to select the current operational mode of the HVAC system. It cycles between

Off, Auto, Cool and Heat

3 Energy button is designed to be a very quick to use option that saves energy (and money). When

you press it, it will back off the set point by a specified value. The default value if 5 degrees from the

current setting. To change the default offset value away from 5 degrees, you must use HouseLinc.

4 Hold over-rides a pre-programmed mode

5 Fan cycles between Auto and Always On

6 Master makes the device the master temperature controller

7 Time / Sensor button allows you to set the date, time and select the sensors/humidity to display. It

cycles between day, time, format, and each sensor option.

8 Program button allows you to setup the various pre-programmed modes (Wake, Leave, Return, and

Sleep).

9 Set button is for INSTEON linking and unlinking as well as accepting the current programming step

and going to the next one in sequence. For INSTEON functions, it works like Set does for other

INSTEON devices.

4 5 6 7 8 9 3