User's Manual

ManualsBrandsSmartLabs ManualsElectronicsRF Thermostat adapter for home automation

Page 2 of 2

Rev. 012208

Quick-Start Guide INSTEON Thermostat Adapter

For HELP

, call our friendly tech support @ 866-243-8018

SmartLabs Limited Warranty – SmartLabs warrants to the original consumer of this product that, for a period of two years from the date of purchase, this product will be free from defects in material and

workmanship and will perform in substantial conformity to the description of the product in the owner's manual and/or quick start guide. This warranty shall not apply to defects or errors caused by misuse

Removing from a Scene

1) Put your Controller into “Delete from Scene” mode (usually “Unlinking” mode (two 10-second press & holds) – please check its Owner’s

Manual if you need help)

2) Press & hold the INSTEON Thermostat Adapter’s button for about 5 seconds

The LCD display on your thermostat will briefly display all its characters, then return to normal

The INSTEON Adapter’s LED will blink off faintly, then return to steady on

Factory Reset

1) Unplug the INSTEON Thermostat Adapter from your thermostat (see Un-Install section on page 1 for details)

2) Press & hold the button on the INSTEON Thermostat Adapter

3) While continuing to hold the button, plug the INSTEON Thermostat Adapter back into your thermostat

4) Continue to hold the button for approximately 5 seconds

All user settings will be erased and the unit restored to its factory settings

Advanced Operations

Using software you will be able to integrate your automation of your thermostat with the wide array of INSTEON compatible products to save

energy and time. For example, applications can include having an email sent to you if the temperature goes above or below any chosen set

points, have a “goodbye” scene automatically set back your thermostat, etc. – the applications are almost endless.

Check with your favorite INSTEON Compatible Software for their latest support for this product.

Specifications FCC Compliance Statement

INSTEON communications RF

INSTEON Controller functionality Not supported

INSTEON Responder functionality Supported

INSTEON message repeating Supported, always on

Mode control Heat, Cool, Auto, OFF

Fan control On, Auto

Degree format Fahrenheit (Celsius is not available)

Maximum number of INSTEON

scenes / links

417

All Linking Supported (10 sec set button push n hold)

Unlink Supported (10 seconds press n hold, twice)

Heat set point Supports all set points of Thermostat

Cool set point Supports all set points of Thermostat

Temperature status request Supported

Humidity status request Supported

Mode status request Supported

Fan status request Supported

X10 Not supported

Dimensions 2.89” W x 1.75” H x 0.58” D

LED Green

Interconnect type Male, RJ10 4 conductor (aka RJ22)

Input power 5VDC, 30 ma max (supplied by thermostat)

Installation Indoor use only

Approvals FCC, Industry Canada

Warranty 2 years

This device complies with FCC Rules Part 15.

Operation is subject to two conditions:

(1) This device may not cause harmful interference,

and

(2) this device must accept any interference that

may be received or that may cause undesired

operation. The digital circuitry of this device has

been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide

reasonable protection against harmful interference

in residential installations. This equipment

generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance

with the instructions, may cause harmful

interference to radio and television reception.

However, there is no guarantee that interference will

not occur in a particular installation. If this device

does cause such interference, which can be verified

by turning the device off and on, the user is

encouraged to eliminate the interference by one or

more of the following measures:

• Re-orient or re-locate the receiving antenna of

the device experiencing the interference.

• Increase the distance between this device

and the receiver.

• Connect the device to an AC outlet on a

circuit different from the one that supplies

power to the receiver.

• Consult the dealer or an experienced radio/TV

technician.

WARNING! Changes or modifications to this unit

not expressly approved by the party responsible for

compliance could void the user's authority to

operate the equipment.