User's Manual

Page 14 of 25 Rev: 3/1/2012 3:06 PM
TempLinc Zone Thermostat Master Button Operation
The Master button makes the local device the Master temperature Controller. The logic behind this is that
as the user walks around the home, they would likely want to have the local temp be the controlling temp.
Since this button will only set the local to be Master, pressing the button a second time does not change
anything.
1
st
press:
 Makes the local TempLinc Zone Thermostat the master
 To perform this, press and hold Master button for 3 seconds
 TempLinc Zone Thermostat beeps once
 Release
Before pressing Master button:
 Notice that the left remote sensor is currently
the Master temperature controller
After pressing Master button:
 Notice that the left remote sensor is no
longer the Master temperature controller
 The local temp now is Master controlling
temperature
Note: If no TempLinc Thermostat is added to TempLinc Zone Thermostat, then Master button will have no
function
Optional Waterproof Temperature Sensor Model # 2433A3
The waterproof sensor has:
 6’ cable
 Bare leads to connect into TempLinc Zone Thermostat
(allows it to be user extendable to 100 feet)
 Waterproof design
 Same color and look as TempLinc Zone Thermostat
designed to be mated
 When plugged in, the TempLinc Zone Thermostat will
display the temperature from the Sensor instead of the
internal monitor
Use case:
 Monitor pools, spas, ponds, and fish tanks
 To sense and / or maintain constant temperature in those items