User's Manual

Specifications
Range 200ft. (line of sight)
Frequency
RF 904MHz
Powerline 132kHz
RF sensitivity -103dbm
Modulation FSK
Messages per seconds 10
Supply voltage, wattage 120VAC, 6VA maximum
Pass-through outlet ratings 120VAC, 15A
Operational environment Indoors, 0-70°C, up to 85% r.h.
FCC ID # SBP2442
The LED on one of a pair of
AccessLinc is continuously blinking
rapidly
The AccessLinc has lost communi-
cations with its paired partner
Move the units closer together
Re-initialize the link (see installa-
tion on page 4)
The LED has turned off and does
not flicker during Insteon transmis-
sions
The Interface may have locked up Remove the interface from power
for 10 seconds and re-install
The wireless range is extremely
limited
Large objects may be interfering
with wireless operations
Check antenna orientation on
paired interfaces
Move the Interface to a different
outlet
Both antenna must be pointed in
the same direction (vertical or hori-
zontal)
Troubleshooting and Technical Support
Still having trouble....
If you cannot resolve an issue you’re having with the AccessLinc Interface;
• Search our on-line knowledge base at:
http://smarthome.custhelp.com
• E-mail: [e-mail]
• Call our Technical Support Dept. at 949-221-9200
7
2442 July 15,04_web.qxd 7/15/2004 11:00 AM Page 7