User's Manual

Page 11 of 32 2474DWH- Rev: 3/6/2012 10:13 AM
- press & hold set button until double-beep
5) Press SwitchLinc Set button once
SwitchLinc will beep once
LED stops blinking
6) Test by tapping the SwitchLinc on and off
None of the former responders will respond
Factory Reset
NOTE: All settings and scenes will be erased
1) Pull set button out (creating an air gap)
2) Wait 10 seconds
3) Press the set button in as far as you can and hold
SwitchLinc will begin a long beep
4) Continue pressing SwitchLinc set button until beep stops
5) Release set button
SwitchLinc LED indicator will turn on momentarily, then turn off
A few seconds will pass
SwitchLinc will (beep)-(beep)
LED will return to normal brightness
The connected lights will come on to full brightness