User's Manual

Page 20 of 39 Rev: 3/6/2012 9:45 AM
Color White (Color change kits available)
Set button Clear
Air Gap Set button (when pulled out)
Plastic UV Stabilized Polycarbonate
Beeper Yes
Setup LED 1, Dual Color, Green & Red
Status LEDs 9, Dimmable, White (Color change kits available)
Dimensions 4.1" H x 1.73" W x 1.73" D
Weight 120 grams / 0.26 pounds
Operating Environment Indoors
Operating Temperature Range 32 - 104 degrees Fahrenheit (0 – 40 degrees Celsius)
Operating Humidity Range 0-90% relative humidity, non-condensing
Storage conditions 4F to +158F (-20 – 70 degrees Celsius)
Electrical
Voltage 100-277VAC +/- 10%, Split, Single Phase
Frequency 50/60Hz (+/- 5%) Auto Detected at power-up
Maximum Load
1,800 Watts (1,700 watts at 100VAC)
17 Amps
Load Type(s) Wired-in inductive/transformer, motor or resistive
Surge Resistance Up to 500 VAC
Retains all settings without power Yes, all saved in Non-volatile EEPROM
Standby power consumption < 1 watt
Safety Approved ETL (Intertek Testing Services)
Certifications FCC, IC Canada