Mobile ID Terminal- BM5510 4G 1
User Manual V 1.0 Table OF CONTENTS: 1. Introduction………………………………………………………………………….….3 2. Important Safety Information…………………………………………….…….3 3. Product Interface………………………………………………………………….….4 4. Operations……………………………………………………………………………….5 5. Troubleshooting ………………………………………………………………………7 6. FAQ………………………………………………………………………………………….7 7.
Introduction Portable. Powerful. Versatile. The ARATE is an all-in-one device for easy identification and Phenomenal battery life. Highly-portable. Feature-packed. When the job calls for a reliable and portable fingerprint scanner, the ARATEK BM5510 Handheld ID Check Terminal is the only choice. The device features an ultra-long battery life that keeps going, making the ARATEK BM5520 the perfect biometrics tool for law enforcement, National ID, remote financial services, and many other applications.
Product Interface 4
Operations Before switching ON device for the first time or after a long time period, put it on charging until full power. 1.Charge Even if the device is not switched ON, the battery will be charged whenever the DC Adaptor power is available. Red/green indicator light: red light when power charging is less than 90%; green light when power charging is greater than or equal to 90%.
2.Power On/Off operation 3.
Troubleshooting Problem 1: charge failure Solution: (1) Check if the plug is inserted correctly. (2) Ensure that micro USB charging port has good contact. Problem 2: heating Solution: Avoid using the device under too hot environment. Stop device operation for a while. Problem 3: crash Solution: a. Long press power button to turn off, then turn on. b. Press reset button to restart device. c. Contact Aratek support team. Problem 4: Other problems Solution: Contact Aratek for support, website: www.aratek.
Technical Specifications Basic Operating System Android 8.1 Processor MT8735 Quad-core 1.3GHz Memory 2G RAM + 16G ROM Display 5 Inches 720*1280 Pixels IPS LCD Resolution 720*1280 IPS Camera 8 MP Auto Focus (Rear) Expansion Card TF Card, Up to 64G Battery 4000 mAh removable (option: 10000 mAh) Charging DC 5V/2.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.