Instruction Manual

6
Installation
Take out the fan assembly. Rotate the fan grille counterclockwise until it is
loose, as shown in Fig. below. Remove the fan grille as per the directions
in Fig. and remove fan blades.
Dismantling the fan assembly
2
Fan assembly
11
13
12
Fan grille Fan blades Rear fan cover
1
2
Installing the rear fan cover
Align the center hole of fan blades with the motor shaft and push into
position. Tighten the blade knob counterclockwise to attach fan
blades to motor that has the rear fan cover installed.
Installing the fan blades
Place the rear fan cover on the motor aligned at the top position.
Tighten fan cover knob clockwise to attach the rear fan cover to motor.
5
1
2
4