Quick Start Guide

Android POS Terminal Model-P1000
Scan the QR code by mobile phone to read the detailed operating
instructions and common fault analysis of the terminal.
1.Packing list
SIM/UIM card：Turn off the machine, tap the battery cover, take
out the battery, and insert the SIM/UIM card chip face down into
the slot of the corresponding card.
Battery：Insert the upper end of the battery into the battery com-
partment, and then press the lower end of the battery.
Battery cover：Insert the upper end of the battery cover into the
machine, and then slide the switch downward to fasten the battery
cover according to the silk screen indication beside the switch.
Note：Before installing the battery, please check the battery
appearance without any damage.
Open：Long press the power button on the side of the machine
for 3 seconds.
Close：Press the power button on the side of the machine, the
screen will display "shutdown", "restart", select shutdown and
press the "confirm" button to complete the operation.
Charging：After installing the battery and battery cover, connect
the power cord to the P1000 DC interface and the other end to the
adapter, and start charging after connecting the power supply.
Please scan the QR code below for detailed instructions
and analysis of common faults
2.Installation instructions
3.Product operation
4.Matters needing attention
5.List of hazardous substances
4.1.Can only use 5V/2A charger.
4.2.Before connecting the power supply to the ac socket during
charging, check whether the power cord and the power adapter
are damaged. If so, they cannot be used any more.
4.3.The equipment should be placed on a stable platform indoors.
Do not place it in direct sunlight, high temperature, humidity or
dusty place. Please keep away from liquid.
4.4.Do not insert any foreign object into any interface of the device,
which may seriously damage the device.
4.5.If equipment failure, please contact specialized POS maintenance
personnel. Users shall not repair the equipment without authorization.
4.6.The software of different distributors has the different operation.
The above operation is for reference only.
Name Quantity
P1000 POS terminal
P1000 quick start guide
Power adapter
Battery
DC Charging line
No.
1 1
1
1
1
12
4
5
6 Printing paper 1
Cable 17
3
Quick start guide
Part name
Shell
Circuit board
Power
Cable
Packaging
Battery
This form is prepared in accordance with SJ/T 11364
：Indicates that the content of harmful substances in all uniform materials of the component is below the limit specified in GB/T 26572.
：Indicates that the content of the hazardous substance in at least one uniform material of the component exceeds the limit specified in GB/T 26572.
/：Indicates that all uniform materials of the component do not contain this harmful substance.
PS：1.Most parts of the product are made of harmless and environment-friendly materials, the parts containing harmful substances cannot be
replaced due to the limitation of global technology development level.
2.Environmental data for reference are obtained by testing in the normal use and storage environment required by the product, such as
humidity and temperature.
Harmful substances
Pb
Hg
Cd
Cr(VI) PBDEs DIBPPBBs
DEHP
DBP
BBP