S802G01 Simple specification Controller model and size:
Product features : S802G01 is a single channel remote controller Power supply:Two 3V Button cell(CR2325) Working temperature:0℃~+50℃ Emission Frequency:915 MHz Emission power:25 mW Emission distance:200 meters outdoor,35 meters indoor Standby current:30 uA Antenna Gain:2 dBi Button description: UP:It can control the motor to rotate upward or combine with other keys to change the direction of the motor. DOWN:Control the motor to turn downward. STOP:It can control the motor to stop turning.
Channel declaration: Normal mode:915MHz Intelligent mode:914MHz、916MHz(Automatic selection of one of two channels) Operational instructions(The part that transmits the signal): Norma mode: 1.Press‘UP’button once and it will send a‘UP’ signal. 2.Press‘DOWN’button once and it will send a‘DOWN’ signal. 3.Press‘STOP’button once and it will send a‘STOP’ signal. 4.
15.21&15.105 statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.