Use and Care Guide

Pond Skins®

10 ft. x 15 ft. EPDM Pond Liner

15 ft. x 15 ft. EPDM Pond Liner

15 ft. x 20 ft. EPDM Pond Liner

20 ft. x 20 ft. EPDM Pond Liner

MODEL/MODELO # EPDMSP1015

EPDMSP1515

EPDMSP1520

EPDMSP2020

PACKAGE CONTENTS

PREPARATION

Before beginning installation of product, make sure all parts are present. Compare parts with package

contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or

operate the product. Contact customer service for replacement parts.

• Estimated Assembly Time: 5 to 12 hours.

• Tools Required for Assembly: Garden hose, Shovel.

NOTES

Calculate the dimensions of your pond. Your pond should be at least 18in. deep at the deepest point.

Allow for a 10 in. overlap around the perimeter of the pond. The chart below shows the approximate

dimensions and volume for each size liner.

Liner Size

Approximate Pond Size Approximate Volume of Water

10-ft. x 15-ft. 5-ft. x 10-ft. x 18-in. 500 gallons

15-ft. x 15-ft. 10-ft. x 10-ft. x 18-in. 1,100 gallons

15-ft. x 20-ft. 10-ft. x 15-ft. x 18-in. 1,600 gallons

20-ft. x 20-ft. 15-ft. x 15-ft. x 18-in. 2,500 gallons

Part Description Quantity

A Liner 1

Questions, problems, missing parts? Before returning

to your retailer, call our customer service department at

1-888-755-4497, 8 a.m.-6 p.m., EST, Monday-Friday, or

email us at customercare@smart-pond.com.

REMINDER

CALL 1-888-755-4497

BEFORE RETURNING TO STORE.

PAGE 1
Pond Skins® 10 ft. x 15 ft. EPDM Pond Liner 15 ft. x 15 ft. EPDM Pond Liner 15 ft. x 20 ft. EPDM Pond Liner 20 ft. x 20 ft. EPDM Pond Liner MODEL/MODELO # EPDMSP1015 EPDMSP1515 EPDMSP1520 EPDMSP2020 REMINDER CALL 1-888-755-4497 BEFORE RETURNING TO STORE. Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-755-4497, 8 a.m.-6 p.m., EST, Monday-Friday, or email us at customercare@smart-pond.com.
PAGE 2
INSTALLATION INSTRUCTIONS 1. Use sand to mark the outline of your pond. Fig. 1 Fig. 1 2. Dig out your pond and remove and debris or rocks that might damage your liner. Add approximately 2 in. of sand to the pond area. The sand functions as a cushion beneath your pond liner. Spread the sand over the entire area and compact it. Fig. 2 Fig. 2 3. Open the liner and drape it across the pond area, making sure to leave at least 10in. of overlap around the perimeter of the hole.