Use and Care Guide

ManualsBrandssmartpond ManualsPond AccessoriesLVML6

Mini LED Lights

MODEL #LVML6

PACKAGE CONTENTS

WARNINGS AND CAUTIONS

WARNING

• To reduce the risk of electrical shock, connect only to a properly grounded, grounding type receptacle .

• Do not exceed the voltage shown on the transformer.

• Do not submerge the transformer and sensor.

• To reduce the risk of fire or injury, keep lamp away from materials that may burn.

• Always disconnect light from the power source before beginning any maintenance or work on the light.

• Inspect cord for damage before installation and/or maintenance. Replace the entire light/transformer

assembly if damage is found.

CAUTION

• Use a proper power source as indicated on the transformer label.

• Keep the cord away from high temperatures or other heat sources.

• Do not lift the light or the transformer by its power cord.

• This light assembly is not intended for use in swimming pools or hot tubs.

Part

Description

Quantity

Lights

Sensor

Transformer

Questions, problems, missing parts? Before returning

to your retailer, call our customer service department at

1-888-755-4497, 8 a.m.-6 p.m., EST, Monday-Friday, or

email us at customercare@smart-pond.com.

REMINDER

CALL 1-888-755-4497

BEFORE RETURNING TO STORE.

PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE.

WWW.SMART-POND.COM

Summary of content (4 pages)

PAGE 1
Mini LED Lights ® MODEL #LVML6 REMINDER CALL 1-888-755-4497 BEFORE RETURNING TO STORE. Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-755-4497, 8 a.m.-6 p.m., EST, Monday-Friday, or email us at customercare@smart-pond.com.
PAGE 2
PREPARATION Before beginning assembly or operation of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. • • Estimated Assembly Time: 5 minutes No tools required for assembly. ASSEMBLY INSTRUCTIONS 1. Connect the light to the sensor by pushing the plug into the sensor socket until it is firmly seated.
PAGE 3
TROUBLESHOOTING • If lights fail to illuminate, check that lights are getting power by testing another appliance in the same power outlet. • The light is designed to turn on when it gets dark, and turn off when it gets light. To activate the light during daylight hours, cover the sensor. • If lights do not turn off during daytime, check sensor. Make sure the sensor faces up and is not covered by dirt or debris. CARE AND MAINTENANCE • Periodically, your lights may require cleaning for optimal performance.
PAGE 4
LIMITED WARRANTY All pumps and electrical products are warranted to the user against defective material and workmanship, under normal working conditions. This warranty period begins on the date of purchase by the original purchaser. Unless otherwise specified all smartpond® electrical products are warranted to the user against defective material and workmanship, under normal working conditions for 1 year from the date of purchase.