User's Manual

Manual Ver1.0
- 34 -
5.6 Routing
There are three routing information related settings.
5.6.1 Routing – Default Gateway
If “Enable Automatic Assigned Default Gateway” checkbox is selected, AG10W
will accept the first received default gateway assignment from one of the PPPoA,
PPPoE or MER/DHCP enabled PVC(s). If the checkbox is not selected, enter the
static default gateway AND/OR a WAN interface. Click “Apply” button to save it.
NOTE: If changing the “Enable Automatic Assigned Default Gateway” from
unselected to selected, You must reboot AG10W to activate the automatic assigned
default gateway.
Figure 41. Advanced Setup – Routing – Default Gateway
5.6.2 Routing – Static Route
Click on “Add” to create a new Static Route. Up to 32 entries can be configured.