User's Manual

Manual Ver1.0
- 36 -
The Routing Information Protocol (RIP) is designed for exchanging routing
information within a small to medium-size Internetwork.
Figure 44. Advanced Setup – Routing – RIP
To configure an individual interface, select the desired RIP version and
operation:
RIP Version 1: Class-based IP network.
RIP Version 2: Classless IP network.
Operation Active: Broadcast and listen to other RIP enabled devices.
Operation Passive: Listen only.
Placing a check in the “Enabled” checkbox for the interface to complete the
configuration. Click the “Apply” button to save the configuration. To start/stop
RIP for AG10W, select the “Enabled/Disabled” radio button for Global RIP
Mode.
5.7 DNS
5.7.1 DNS Server