SmartRG ADSL 2+ WIRELESS 4 PORT ROUTER : User's Manual : Page 41

Manual Ver1.0

- 41 -

6.2.2 802.1X

802.1X addresses the WEP weakness by adding user authentication, via RADIUS

server. So you need to have your RADIUS server up and running before using

802.1X. To enable 802.1X, select “802.1X” in “Network Authentication”. Enter

your RADIUS server IP address, port number (default: 1812), and key. Follow

section 6.2.1 to configure your WEP key and select “Save/Apply” to save your

configuration.

Figure 51. Wireless Setup – Security – 802.1X

6.2.3 WPA/WPA2

WPA (Wi-Fi Protected Access) is the strongest wireless security provided by

AG10W. Like 802.1X, WPA must co-work with RADIUS server as well. To

enable WPA, select the following items step by step:

Network Authentication: WPA/WPA2

WPA Group Rekey Interval: in seconds. Default: 0 (no re-keying).

RADIUS Server IP Address/Port/Key: must match your RADIUS server.

WPA Encryption: TKIP ( select AES or TKIP+AES for WPA2).

Check your supplicant capability before you decide which one to use.