User's Manual

Manual Ver1.0
- 6 -
Figure 1. Rear view of AG10W
Connecting the Hardware
Connect AG10W to the phone jack, the power outlet, and your computer or network.
WARNING
Before you begin, turn the power off for all devices. These include your
computer(s), your LAN hub/switch (if applicable), and AG10W.
Step 1. Connect the ADSL cable and optional telephone
Connect one end of the phone cable to the RJ-11 connector on the rear panel of AG10W. Connect
the other end to the ADSL outlet provided by your service provider (normally MODEM port of the
attached splitter).
Step 2. Connect the Ethernet cable
Connect one end of the Ethernet cable to the one of the four RJ-45 connectors on the rear panel of
AG10W and connect the other end to your PC’s network adaptor (NIC). If you are connecting a
LAN to AG10W, attach one end of the Ethernet cable to a regular hub port and the other end to the
LAN port on AG10W.
Step 3. Attach the power connector
Connect the AC power adapter to the power connector on AG10W and plug in the adapter to a wall
outlet or power extension.