User's Manual

Manual Ver1.0
- 8 -
3. Configuration
3.1 Setup
 Connect AG10W and PC with an RJ-45 Ethernet cable.
 Turn on AG10W.
 The default IP address of AG10W is 192.168.1.1.
3.2 Establish The Connection
 Enter the IP address (default: 192.168.1.1) of AG10W in the address line of Web
Browser
 A Dialogue Box will pop up to request the user to login. (Figure 1)
Figure 2. Authentication
 Please enter the management username/password into the fields then click on the
OK button (default username/password is admin/admin).
 If the authentication is valid, the home page “Device Info - Summary” will be
displayed on the screen. (Figure 3)