User's Manual

EXPAND YOUR PL60 NETWORK
If you would like to add more than 2 adapters, press the Link button of the additional
adapter for no more than 3 seconds. The Power LED blinks after you release the button.
Within 2 minutes, press the Link button of any adapter in your existing network for no more
than 3 seconds. The Power LED blinks after you release the button.
After performing the above security steps, your network will be securely configured using
the same network encryption key for all adapters.
ADDITIONAL SUPPORT
Subscribers: If you require further instructions, contact the Service Provider from whom this
product was purchased.
Service Providers: Contact SmartRG support at [e-mail] or your SmartRG Sales
Engineer.
SMARTRG INC. ALL RIGHTS RESERVED. COPYRIGHT 2016 ©